The store will not work correctly in the case when cookies are disabled.
This website requires cookies to provide all of its features. For more information on what data is contained in the cookies, please see our Privacy Policy page. To accept cookies from this site, please click the Allow button below.
We use cookies to make your experience better.Learn more.
How to Secure and Stabilize Floor-Standing Speakers
How to Secure and Stabilize Floor-Standing Speakers
There are some pretty simple solutions that you can use to secure and stabilize floor-standing speakers. And this is regardless of your loudspeakers’ manufacturer or brand.
There's always the risk that a tall tower or floor-standing speaker can fall or be tipped over by pets, young children, and guests. So, what can you do to reduce the risk of damaging the speaker or, God forbid, hurting somebody? Here are ways you can secure and stabilize floor-standing speakers.
5 Ways to Secure And Stabilize Floor-Standing Speakers
1. Use Spikes
If you have carpet and your speakers are sitting on a carpet, please consider moving to spikes. And the reason is that those spikes will penetrate through the carpet, into the floor material underneath, solid surface, and you'll have a better chance of being able to make sure that that floor-standing speaker doesn't rock.
2. Ensure Speaker is Level
Now, it is also critically important to make sure the speaker is entirely and perfectly level. I don't necessarily mean putting a level on it.
What you want to do is try rocking the speaker front to back, side to side, and diagonally from corner to corner, front to back. Your speaker shouldn’t wobble in any significant way. Yes, you might get a little bit of movement, particularly if you have a wood or laminate floor with underlayment below, but it still shouldn't be wobbling.
Let's say your cat jumps on top of the speaker, and it's not perfectly level. Well, that could set into motion the speaker rocking, and, heaven forbid, it falls over.
3. Use Bases
Bases, plinths, or outriggers expand the speaker’s footprint, whether it’s just side to side or front to back, or both. And why is that important? Well, you're going to get more stability the further out the contact points are. Again, if you're using either rubber feet or spikes, moving those further apart is going to give you more front-to-back and side-to-side stability.
We offer outriggers for our floor-standing loudspeakers. Many companies do, and they can make a vast improvement. You should consider it if you have young children or pets that tend to jump up on your floor-standing speakers.
4. Consider A Custom-Made Base
What if you have speakers that a manufacturer doesn't offer a base or something like that? Well, if you or know somebody handy with woodworking, you can have it custom-made.
Floor-standing speakers usually come with threaded inserts for mounting spikes or rubber feet. You can create a template using the speaker’s base and make a larger plinth that screws into those original mounting points.
And again, if you're handy with woodworking or have a woodworking friend, you can make a DIY wooden base with a contrasting black finish or match the grain and shade of your speakers for a streamlined look.
5. Bolt Your Speakers
Some people bolt their speakers on a heavy concrete or stone base. It may sound very extreme, but if you have large dogs that run around the house, this method is an iron-clad solution to ensure that the speaker is not going anywhere.
If you don't care about your floors, you can always build an extended base or plinth that's outside of the speaker and directly bolt it to the floor. We recommend you put something compliant between the wood and the floor, the bottom of the speaker, the bottom of the plinth base, and the floor. Otherwise, there's a chance, at some frequency, you're going to get buzzy vibrations.
Final Thoughts
Safety is paramount when it comes to floor-standing speakers or any tall object.
There are many options you can do to secure and stabilize floor-standing speakers. But you should always start by ensuring the speaker is perfectly level. If it wobbles at all, you need to make some slight adjustments to the feet so that it doesn't rock anymore. And, keep in mind that even if you have a level on it, there will be inconsistencies. So, it’s crucial to practice precautions.
After graduating with a degree in Electrical Engineering Andrew went on to join the R&D team at API (Audio Products International) makers of Energy and Mirage product lines. He was working directly for API's head of engineering Ian Paisley, who was also a member of that handful of loudspeaker designers who participated in the NRC research project, and to quote Ian Colquhoun "one of the finest loudspeaker designers to ever grace this planet".
Andrew spent over 10 years at API and ended up being the head designer for all the Mirage products. Andrew is a brilliant loudspeaker designer who has a broad knowledge of everything audio and a particular expertise in the science relating to the omni-directional psychoacoustical effects of loudspeaker reproduction. Andrew joined Axiom in 2009.
Need help or advice?
We are here to help you make sure you are getting the product you need! Call us today!